80 Willow Walk, Unit 1, London SE1 5SY Monday to Saturday, 9am to 6pm 020 7237 6805 info@consolerepairs.org.uk

Joy-Con drift on Switch and Switch 2: checks, fixes and repair options

How to confirm your Joy-Con or Joy-Con 2 is really drifting, the quick fixes worth trying, what to avoid, and how Nintendo's repair route compares with a local stick replacement.

Get a free quote

Tell us which console you have and what it’s doing. We’ll reply with a price and a drop-off time.

    We use these details only to reply to you. See our privacy notice.

    Published 17 November 2026

    Your character creeps across the screen on its own, menus scroll by themselves, or the camera slowly turns when nobody is touching the stick. That is stick drift, and it is the most common fault we see on Joy-Con controllers. It affects the original Switch, Switch OLED and Switch Lite, and the newer Joy-Con 2 for Switch 2 can develop it too. Here is how to confirm it, what is worth trying at home, and what your repair options are.

    First, make sure it really is drift

    Drift means the console is reading stick movement when the stick is centred. Before blaming the controller, rule out the game and the console:

    • Try more than one game. Some games have large or small dead zones, so a slightly worn stick can look fine in one and drift in another. If it only happens in one title, check that game's own control settings first.
    • Use the console's own stick test. On the original Switch, go to System Settings, Controllers and Sensors, then Test Input Devices and Test Control Sticks. The Switch 2 has the same kind of test in its controller settings. Let go of the stick: the marker should sit in the centre. If it wanders or rests off centre, the stick is reporting movement on its own.
    • Swap sides. If you have another Joy-Con or a Pro Controller, try it in the same game. If the other controller behaves, the fault is in the drifting Joy-Con, not the console or the game.
    • Check both attached and detached. A Joy-Con that drifts only when it is slotted onto the console, but not when used wirelessly, points to a rail or connector problem rather than the stick itself. That is a different repair.

    Things worth trying before a repair

    These take a few minutes and occasionally sort out mild drift, or at least tell you whether the stick is truly worn.

    1. Update the console and the controllers. Install any pending system update, then look for the Update Controllers option in the controller settings. Updated firmware will not repair worn hardware, but it rules out a software cause.
    2. Calibrate the sticks. In the controller settings choose Calibrate Control Sticks and follow the on-screen steps. Calibration resets where the console thinks the centre is. If the drift is caused by a small offset it can help; if the stick's reading jumps around, calibration will not hold for long.
    3. Give the stick a gentle workout. With the console off, rotate the stick slowly round its full range a few times and press it in. Light dust can sometimes be moved this way.

    What not to do

    Online guides often suggest blasting compressed air under the stick or spraying contact cleaner into it. Compressed air can push dirt further in and the propellant can leave moisture behind. Contact cleaner may hide the problem for a few days, but it does not replace worn parts and the wrong product can damage the plastic. Neither is a lasting fix.

    It is also worth knowing that opening a Joy-Con yourself, or having it opened by anyone other than Nintendo, can affect what Nintendo will do for you later (see below). The internals are small and the ribbon cables are fragile, so a DIY stick swap that goes wrong can turn a stick fault into a dead controller.

    Why Joy-Con drift happens

    Joy-Con sticks measure position with small sensors that rely on parts rubbing against each other. Over time that contact wears, and dust and grime get in around the stick. The reading at rest then stops being a clean centre, and the console sees movement that is not there. Heavy use speeds this up, but drift can appear on controllers that have not been used much.

    Some aftermarket controllers use Hall effect sticks, which read the stick position with magnets and so avoid that kind of contact wear. Nintendo has confirmed that the Joy-Con 2 for Switch 2 does not use Hall effect sticks, although it says the new sticks were redesigned. So drift is still possible on Switch 2 controllers, and the same checks above apply.

    Your options: Nintendo, an independent repair or a new controller

    Nintendo's own repair service

    Since 2023 Nintendo has offered to repair drifting Joy-Con for customers in the UK free of charge, including controllers outside the standard warranty. Its conditions have excluded accidental damage and controllers that have been opened, modified or repaired by a third party. You book through Nintendo's UK support site and post the controller off, so you will be without it for a while. Check Nintendo's support pages for the current terms before you book, as policies can change.

    An independent stick replacement

    If your Joy-Con has already been opened, has other damage, or you would rather not post it away and wait, a repair shop can replace the stick module. On a Joy-Con this means replacing the thumbstick assembly and testing the controller on a console before it is handed back. Once a controller has been opened by an independent shop, you should not expect Nintendo to take it in under its own free repair offer, so it is worth deciding which route you prefer first.

    We also see Joy-Con with drift plus another fault: a loose rail that no longer locks onto the console, a stuck shoulder or trigger button, a weak battery, or a controller that will not pair. These can usually be dealt with at the same time, which is often simpler than sending the controller to two places.

    When a new controller makes more sense

    If a Joy-Con has liquid damage, a cracked shell and a failing battery as well as drift, it can be more sensible to replace it. We will tell you honestly if a repair is not worth it, and the price is always agreed before any work starts.

    Looking after your sticks

    • Store Joy-Con on the console or in a case rather than loose in a bag, where grit gets in around the stick.
    • Wash and dry your hands before long sessions, especially after eating.
    • Avoid leaving the controller somewhere the stick is held at an angle, such as wedged under a cushion.
    • Keep the console and controllers updated so you are not chasing a software fault.

    Bring your Joy-Con in

    If the stick test shows drift and calibration has not fixed it, bring the controller to Creative IT Console Repairs at 80 Willow Walk, London SE1 5SY. You can walk in Monday to Saturday, 9am to 6pm, with no appointment, or call 020 7237 6805. We will test it, explain the fault and agree the price with you before any work starts, and repairs come with a 90-day warranty. See our Joy-Con repair page for what we fix, or our Nintendo Switch repair and Switch 2 repair pages if the console itself has a problem too. Directions are on our contact page.

    Not sure what’s wrong? We’ll diagnose it and agree the price with you before any work starts.

    Call us Get a quote

    Book online: Book a console repair online

    Book online